Guangdong Jiema Energy Saving Technology Co.,Ltd

Produkt-Liste

Home > Produkt-Liste > Wärmetauscherteile > U-Tube > U-Röhre für Shell & Tube Wärmetauscher

Kontakten mit Lieferant
Abby

U-Röhre für Shell & Tube Wärmetauscher

  • $200
    ≥1
    Piece/Pieces
Zahlungsart:
L/C,T/T,Paypal,Western Union
Incoterm:
FOB,CFR,CIF,EXW,DDU,DDP,Express Delivery
Minimum der Bestellmenge:
1 Piece/Pieces
Transport:
Ocean,Land,Air,Express
Hafen:
Guangzhou
Share:
  • Produktbeschreibung
Overview
Produkteigenschaften

MarkeJiema

Anwendbare IndustrieProduktionsstätte, Lebensmittel- und Getränkegeschäfte, Maschinenreparaturwerkstätten, Energie & Bergbau, Bauarbeiten, Baustoffläden, Lebensmittel- und Getränkefabrik

Service Außerhalb Der GarantieErsatzteile, Online-Hilfe

Wo Werden Lokale Dienstleistungen Erbracht (in Welchen Ländern Gibt Es Servicestellen In Übersee)?keiner

Showroom-Standort (in Welchen Ländern Gibt Es Musterräume In Übersee)keiner

Inspektion Der VideofabrikUnter der Voraussetzung

Mechanischer PrüfberichtUnter der Voraussetzung

Marketing-TypNeues Produkt 2020

HerkunftsortChina

SpeziesWärmetauscherrohr

VerwendenHeizungsteile

Zertifizierungce

Garantiezeit1 Jahr

Service-SystemOnline-Hilfe

MaterialCarbon steel, Stainless steel

UsageCooling, Heating

Lieferfähigkeit & Zusatzinformationen

VerpakungHolzkasten

Produktivität1000pcs/month

TransportOcean,Land,Air,Express

Ort Von ZukunftChina

Unterstützung über1000pcs/ month

Zertifikate ISO, CE certification

HS-Code8419500090

HafenGuangzhou

ZahlungsartL/C,T/T,Paypal,Western Union

IncotermFOB,CFR,CIF,EXW,DDU,DDP,Express Delivery

Verpackung & Lieferung
Verkaufseinheiten:
Piece/Pieces
Pakettyp:
Holzkasten

Kurze Beschreibung:

The U-tube is mainly used to replace the core of the U-tube heat exchanger. Due to the structural limitation of the U tube heat exchanger, it is easy to block and difficult to clean at the U-shaped corner. If some of the tubes in a set of U-shaped tube bundles are blocked, the heat exchange tube can be sealed to ensure that the remaining tubes can continue to be used. However, if multiple heat exchange tubes are blocked, the heat exchange efficiency of the entire heat exchanger will be greatly reduced, and the original heat exchange function cannot be reached. In this way, it is required to be replaced.

Beu Heat Exchanger Tube Bundle


What is U Tube Heat Exchanger?


U tube heat exchanger refers to a shell-and-tube heat exchanger in which the tube bundle is composed of U-shaped tubes with different radius and both ends of the tubes are fixed on the same tube sheet. Since each U-shaped tube can be freely stretched, there will be no temperature differential stress between the tube bundle and the shell. So it has less risk of leackage on the welding parts. Baffles, longitudinal partitions, etc. are arranged in the shell side. The baffles are fixed by tie rods. The longitudinal baffle is a rectangular flat plate installed parallel to the heat transfer tube to increase the flow rate of the medium on the shell side.


Beu Heat Exchanger Structure

Advantage of U Tube Heat Exchanger:


There are 3 types of shell and tube heat exchanger. The easiest one is Fixed Tube Heat Exchanger. It has simple structure and low technical requirements, but it can not stand high temperature difference for shell side and tube side.

Shell Tube Heat Exchanger Jiema

In order to solve the problem of temperature differential stress , Floating Head Heat exchanger is designed. However, since its structure is too complex, the production cost is so much higher than Fixed Tube Heat Exchanger. For this reason, it's not widely used like Fixed Tube Heat Exchanger.

Profile Floating Head09

Compared with Fixed Tube Heat Exchanger and Floating Head Heat Exchanger, U Tube Heat Exchanger has medium production cost however it could erase the temperature differential stress as well. It is widely used in different industrial fields. As it's the most cost-efficient one, it has larger market than Floating Head Heat Exchanger.

Profile U Tube He5


How could we help you?

Guangdong Jiema Energy Saving Technology Co Ltd


The U-shaped tube heat exchanger produced by Jiema can not only replace the core of the existing U-shaped shell and tube heat exchanger, but also provide the core body for the newly produced U-shaped shell and tube heat exchanger.

If you are an engineering company who mainly deals with heat exchanger , we can design and manufacture new U-tube bundles according to the size and structure of your original equipment for you to replace .

If you are a shell-and-tube heat exchanger manufacturer , we can manufacture new U-shaped tube bundles according to your drawing requirements, and provide export and door-to-door services , you only need to assemble and weld the entire U-shaped tube bundle with the cylinder body, A new U-shaped shell and tube heat exchanger can be produced.


If you have any further questions, pls feel free to contact.


Produktgruppe : Wärmetauscherteile > U-Tube

Mail an Lieferanten
  • *Fach:
  • *Zu:
    Ms. Abby
  • *E-Mail-Adresse:
  • *Nachrichten:
    Ihre Nachrichten muss zwischen 20-8000 Zeichen sein

Home > Produkt-Liste > Wärmetauscherteile > U-Tube > U-Röhre für Shell & Tube Wärmetauscher

Anfrage versenden
*
*

Anfrage versenden

Abby

Ms. Abby

Telefonnummer:+86-020-82453507

Fax:

Mobiltelefon:+8613662249479

E-Mail-Adresse:jmheatexchanger@163.com

Firmenadresse:No.73, Bigang Road, Nangang Street, Huangpu District, , Guangzhou, Guangdong

Mobile Seite

Zuhause

Product

Phone

Über uns

Anfrage

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

senden